世旼偉德DN2000角機+切割鋸解決大型塑料管多角度焊接難題

來源：發布時間：2025-10-13

In fields such as municipal water supply, sewage treatment and energy transmission, large plastic pipes are widely used due to their advantages such as corrosion resistance and low cost. However, multi-angle welding of large-diameter pipes has always been a construction bottleneck.

在市政供水、污水處理及能源輸送等領域，大型塑料管因耐腐蝕、成本低等優勢應用多領域，但大口徑管材的多角度焊接始終是施工瓶頸。

Traditional welding equipment has problems such as poor Angle adjustment accuracy and low welding efficiency, which can easily lead to interface leakage, project delays and other hidden dangers.

傳統焊接設備存在角度調節精度差、焊接效率低等問題，易導致接口泄漏、工程延期等隱患。

Shimin Weide focuses on the pain points of the industry and, drawing on years of experience in the research and development of pipeline construction equipment, has launched an overall welding solution for large diameters of 2000mm.

世旼偉德聚焦行業痛點，結合多年管道施工設備研發經驗，推出大口徑2000mm整體焊接解決方案。

This solution takes the 1200-angle machine as the core and is equipped with high-precision pipe cutting saws to form an integrated operation process of "cutting - welding".

該方案以1200角機為重心，搭配高精度管道切割鋸，形成“切割-焊接”一體化作業流程。

The 1200-angle machine is driven by a servo motor, with an Angle adjustment range of 0 to 90 degrees and a positioning accuracy error of less than 0.1 degrees. It can perfectly meet the welding requirements of different angles.

1200角機采用伺服電機驅動，角度調節范圍達0-90度，定位精度誤差小于0.1度，可完美適配不同角度的焊接需求；

The matching cutting saw is equipped with diamond saw blades, with a maximum cutting diameter of up to 2000mm. The cut surface is smooth and flat, significantly reducing the processing time of the welding interface.

配套切割鋸則搭載金剛石鋸片，切割直徑比較大可達2000mm，切口平整光滑，大幅降低焊接接口處理時間。

At present, this set of equipment has been put into use at the installation site of a large-scale water supply project in Africa. The construction team reported that the equipment is easy to operate, and the time consumption of a single welding process is 40% shorter than that of traditional equipment. The pass rate of the welding interface after pressure testing is 100%. It not only ensures the quality of the project but also completed the key construction nodes ahead of schedule, providing strong support for the smooth progress of the project.

目前，這套設備已在非洲某大型供水項目安裝現場投入使用，施工團隊反饋，設備操作便捷，單道焊接工序耗時較傳統設備縮短40%，焊接接口經打壓測試合格率達100%，不僅保障了工程質量，還提前完成了關鍵施工節點，為項目順利推進提供了有力支撐，

It has received dual recognition from the owner and the supervision unit.

得到業主方與監理單位的雙重肯定。